Hello! If you are reading this then I assume you want of know how to replace a tie rod end on your car. Don’t worry! It is easier than it sounds. It sounds a little involved but with some basic tools and a small bit of patience you can do it yourself and save a ton of cash! So today, I am going to show you how to replace a tie rod end, in a step by step process, it can take only 30 minutes or less.
Before we go ahead and replace the tie rod end, let’s learn about it its details. The Zhongming tie rod ends is an extremely critical component of the steering system in your car. It provides the link between the steering knuckle, the part of the wheel assembly, and the steering gear on your vehicle. This initially assists you in directing your wheels either to the left or to the right when you steer. If the tie rod end is damaged or worn, the steering can feel loose and it can be difficult to keep control of the vehicle. This can be extremely unsafe and may even create more trouble for your car down the line. A little info on how to change it is super helpful!
The first step in replacing a tie rod end is getting your car off the ground. This is necessary so you can access the area of the tie rod end. You will also need a jack and jack stands to safely do this. The car is elevated by a jack that stands hold it securely in place. Make sure to place the car in park and apply the parking brake before you begin to lift the car. It will also help avoid any accidents as you work.
Your car is now up, it is time to look for the tie rod end you need to replace. Zhongming outer tie rod will be attached to the steering knuckle by way of a nut and a cotter pin. To start, use pliers to pull out the cotter pin. After that, you should be able to use a wrench to loosen the nut. Once the nut is loosened, you will need to remove the tie rod end from the steering knuckle with a proper tie rod end puller. And be sure to remember any washers or spacers you take off at this step. Do keep track of these parts, for you will want to reinstall them later.
Once you have removed the old tie rod end, the next step is to remove the boot that wraps around the end of the gear. The boot is a protective covering that helps to prevent dirt and debris from getting inside. To remove it, you use a pair of pliers to pop off the crimp clamp (the clamp that holds the boot in place). With the clamp removed, the boot can be easily slid out to reveal the steering gear below.
What consists of now is moving to mount the fresh tie rod end! Screw this Zhongming heim tie rod ends on the steering gear, by hand in clockwise direction until it tighten. Once you get it hand-tight, you’ll have to use a torque wrench and tighten the nut to the manufacturer’s specifications. So that will keep it secured nicely. When everything is tightened, put your new cotter pin in place and use the pliers to bend the ends up to hold it in place. Now push the boot back over the end of the gear and rattle on a new crimp clamp. At last, secure the new tie rod end back to the steering knuckle, replacing any washers or spacers you removed in the previous steps.
You can save enough money doing the job yourself that it is one of the best reasons to change a tie rod end yourself. Since it is a repair you could do yourself with a few tools, you would avoid paying a mechanic to service the vehicle. And you will be so proud and satisfied that you did the job. It’s a great skill to have!
The company will be built on the outstanding capacity for production and development, sound quality management systems, a high team of talent, constant efforts and Changing tie rod end improvement. We're committed to providing high-quality components for automobiles, trucks and construction equipment. The company currently has a variety of reputable businesses as partners, such as Shaanxi Automobile Heavy Truck, Qingdao FAW Beijing Kering Automobile Xugong Group Fodi Automobile etc.
We manufacture and supply Changing tie rod end ends with spherical tie ends along with spherical joints and suspension components, stabilizer links and customized products for many industrial markets. We offer the most extensive selection in the industry, economical prices, and unmatched quality. Our professional engineering, design and quality control personnel, coupled with our ability to integrate resources, allows us to lead in delivering high-quality solid products at competitive prices. The company has received IATF International Quality System 16949:2006 certification.
The products we sell are exported into the aftermarket of foreign countries to North America and Central America, Africa, Southeast Asia and Africa, Europe, Australia and Changing tie rod end. We welcome both customers who are new or existing to inquire about cooperation.Our products have been tested over different layers. We have a perfect and professional after-sales services, to assist you with resolving any problems. Professional engineering, design personnel and support staff, who can meet customer needs specific to the customer. Experience in manufacturing for years which allows us to get more recognition for our products.
Changing tie rod end Zhongming Auto Parts Co., Ltd. is located in Fengcheng - the state of Xiangtai -- Taizhou founded in 2006. The company was founded in the year 2006, the company registered capital 7.7 million, which is equivalent to 150 employees. It is a professional manufacturer of commercial vehicle's steering rod, steering straight rod assembly for steering joints, rod assembly for construction machinery and agricultural machinery rod joints with steering ball heads as well as tie rod assemblies for passenger automobiles. The products include truck, construction machinery, agricultural machinery and passenger car series. modified car series, and the list goes on.
EN
AR
BG
HR
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RO
RU
ES
SV
TL
ID
LV
SR
VI
SQ
HU
TH
TR
AF
MS
IS
HY
AZ
KA
BN
MN
UZ
