removing inner tie rod

Step One: Firstly, ensure the engine of the car is off fully. Safety is very important! After that, jack the car off of the ground. And safety is key to ensuring the car in stable and safe on jack stands. So your car doesn't fall or move while you are working.

Next, remove the front wheels. Step 2 This is required so that we can properly view and access the inner tie rod. A lug wrench is a must tool that you will need to loosen the lug nuts which have kept wheels perfectly tight. But don't lose all the nuts, you will need use them when putting on wheels back in place later.

Quick and Easy Method to Remove Inner Tie Rod

Step #3 Now You Need A Tie Rod Removal Tool. It helps you release the outer tie rod end from something called a steering knuckle. The piece on pancake can be inserted into the small crevice between top and bottom shell, then applying pressure by pushing down to separate both pieces. Please be slow, and gentle so you do not break anything.

Step 6: Great job so far! Now you can either install a new inner tie rod, or have the old one repaired. If you are installing a new tie rod, then simply work through the steps in reverse. Which is you will perform the every steps reverse way and be sure to place all of them in right order.

Why choose Zhongming removing inner tie rod?

Related product categories

Not finding what you're looking for?
Contact our consultants for more available products.

Request A Quote Now