Suspension sway bars, or stabilizer bars (generic terms), help you keep your car on the road when going around corners. Just pretend you are turning your bike rapidly. You may notice a bias toward one end on your part. This is exactly how a car works. This makes the car rise from one side to lean or tilt down when turning. This rocking motion generally means the car is more difficult to handle. The sway bar ties one side of the suspension to the other and balances out weight. It stops the car from tipping over and reduces body lean or sway.
The reason this is important, and sway control was invented in the first place, ties back to wheel grip. This is because the less your car sways and weaves from side to side, the more of that precious rubber can stay in contact with road surface. So you can handle the car much more. If you can drive your car and control it well, then turn as this is a more aggressive mode of driving without the risk of sliding or going off-road. That is making driving not only better, but safer and more fun.
If you are looking into upgrading your sway bar, there some key things to take note of. The first thing to check out is the size of the sway bar. It also allows a thicker sway bar to further stabilize your car and lessen the swaying. However, the sway bar should not be too stiff. Apart from that, if it is too stiff as well then it brings back the cons again namely; a hard and uncomfortable ride for you while driving.
One other potential factor to weigh, is whether or not you would prefer a solid sway bar in place of the same hollow one. Plated sway bars are more robust than solid and offer improved support for your car; at a premium, however they can be almost twice as heavy which directly impacts unsprung weight. Hollow anti-sway bars, meanwhile, are typically cheaper and lighter but may be less strong or (perceived as) flexy than a solid bar. Each type does have pros and cons, and it is worth taking those into account as you are making your selections.
Changing out your sway bar can help make sure that whatever performance or safety products you have will continue to make an impact, for better handling and comfort. If you need a sway bar, Zhongming makes different kinds to fit many cars. Zhongming has both a weightier sway bar to decrease swaying or an aluminum hollow one for better rotation, depending on the way you want your car. The best you can do is work with the professionals and they will help find a perfect sway bar that meets your car needs.
Naturally, the fact that your car is more rooted on to the road it also makes its safer. Immobilizing your car makes preventing yourself from getting into more trouble on the road easier. And, if anything comes up in front of you all the sudden a well-balanced car will help you have what it takes to handle that unforeseen situation. Please do not drive with a cup of coffee or your phone in hand, this can prevent accidents and keep you on the road safe.
That means you do not endure any comfort horror by going for a bigger sway bar. In fact, a good suspension system can help bring out the best in your vehicle. A more comfortable ride can be achieved through less swaying, and better handling. That results in less bounce than if you had your stuff piled up on a bunch of spare duffel bags, which (long story short) means significantly fewer road noise and the most comfortable ride for all inside.