Please Make Your Car Clean! This condition it requires a complete servicing so get in touch with an expert for effective car repair and maintenance. When inspecting a vehicle, one thing to check is the inner tie rod. So, follow the steps below to change your inner tie rods today on you car. Sounds tough, right? Tap into this wherever possible. But we have some solutions that make it easier for you.
Find out first more about the inner tie rod and why it is important. The inner tie rod is one of your car’s steering system components. This actually keeps your car from veering off its expected course. The inner tie rod connects the rack and pinion to something called an outer tie rod end, which then connects to your wheels. Your steering can be caused by an incorrect inner function in the tie rod. And that you start having difficulty steering your car. If your steering wheel makes unusual noises when you turn it or if the turning process gets more difficult compared to before, then perhaps it is about time to replace the inner tie rod. The faster you get this looked at, the safer your vehicle is.
Some of you might be thinking replacing the inner tie rod is a job for professionals. But guess what? You can do it yourself! If you have some common hand tools and a little bit of know-how, you should be able to fix it all yourself. SuppliesBefore you get started, gather up some of your supplies. What you'll need:A jack to lift the carJack stands, or other method of safety while workingA socket wrench for removing nutsTie rod separator if necessary (it will be)New inner tie rod Make certain that these instruments are in perfect working order before spending on your car.
So you might be wondering, when is it really time to replace your inner tie rod? There are tell-tale signs that will help you identify this. One hint may be your steering feels wobbly or loose with the car. It does also mean that if your steering wheel begins to shake or quiver on you while driving, there could be an issue happening. Be sure to look out for these symptoms and if you experience any of them, check your inner tie rod. In addition, if you notice funny sounds when turning your steering wheel that is an indicator another layer may not quite be right so might get this checked further.
So you have identified your inner tie rod and need to change it, lets take a quick step by step of how replace this little bugger on your own. Start by lifting your car with the jack. Just be certain to use a healthy pair of jack stands under the car as you work on it. Following the car being raised, remove front wheels. This is to get a snugfit on the tie rod.
Then use the socket wrench to cautiously take off the nut that secures your outer tie rod end. This is a critical step, so do it carefully. After you do that, the tie rod separator will be needed. The other part of the steering system is a tool that assist to remove outer tie rod end off from the steering knuckle, this too you should ask in autozone. Once the outer tie rod is removed you can release the locking pin and nut which holds inner tie rod in place. Then use a wrench to unscrew the inner tie rod from the steering rack. This might take awhile, but be patient!
The Inner Tie Rod has been removed, now it is time to install the new one! Now gently screw in the new inner tie rod into the steering rack From there, get the nut aswellas locking pin to keep it in place. After that you will need to screw the outer tie rod end back onto inner tie rod. This is to ensure that all of the connections are done correctly. Reinstall the Outer Tie Rod End to Steering Knuckle using your tie rod separator. After everything is lined up, reverse the procedure then put your front wheels back on and let down off of jack stands.